DTF Transfers for Sweatshirts
Full-color transfers for crewneck sweatshirts and fleece. Printed in Miami with no minimums, gang sheets, and rush available.
Sweatshirt print zones: what goes where
Crewnecks give you a clean flat panel, so the placement rules are simple.
Exact measurements for every zone live in the placement guide.
Custom sweatshirt ideas: three prints we would run
Not specs, opinions. What we would press if the crews were ours.
The vintage front
A retro print on a garment-dyed crew is instant nostalgia. The washed color does half the work; the print finishes the look.
The left-chest minimal
One small mark on a heavyweight crew reads elevated basics. Understated, and it costs inches instead of dollars.
The matched set
One design across navy and mustard blanks. Batch them on a gang sheet for the best value.
The sweatshirt blanks we recommend
Crewneck fleece by weight and feel, all from real spec sheets.
Gildan 18000 Heavy Blend
- 8 oz, 50/50 cotton/poly fleece
- Smoother printing face, reduced pilling
- 1x1 rib collar, cuffs, and waistband
Best for: bulk runs and budget-friendly orders
Bella+Canvas 3901 Sponge Fleece
- 8 oz Airlume cotton/poly fleece
- Retail fit, raglan sleeves, side seamed
- Tear-away label
Best for: boutique brands that want a soft raglan crew
Comfort Colors 1566
- 9.5 oz, 80/20 ring-spun cotton/poly
- Garment-dyed, slight color variation
- Heavyweight vintage feel
Best for: vintage washes and a heavyweight hand
Also on file: Port & Co. PC850 Fan Favorite (8.5 oz cotton-face crew) and Independent 562M.
Why DTF for sweatshirts?
| DTF transfers | HTV vinyl | Screen printing | |
|---|---|---|---|
| Full color and photos | Unlimited colors in one transfer | Each color cut and layered by hand | Every color adds a screen and a fee |
| One-offs and small runs | No minimums, order a single transfer | Fine for one piece, slow for twenty | Setup costs favor large runs |
| Feel on the garment | Soft and thin, moves with the fabric | Can feel thick when layered | Soft, though heavy coverage builds up |
| Dark garments | White underbase built into every print | Needs an extra white base layer | Needs an underbase pass |
Fair is fair: screen printing wins on 100+ identical pieces in 1 or 2 colors, and vinyl is fine for a single name or number. For everything else, ready-to-press DTF is faster, softer, and has no minimums.
Sweatshirt DTF in 20 seconds
Deep dive: the placement guide and artwork guidelines.
No heat press? We'll press it for you.
Send us your blanks, or order the garments finished: we press every transfer, inspect each piece, and hand it over ready to wear.
Get a Quote →Everything about DTF transfers for sweatshirts
Full-color DTF transfers press onto crewneck fleece with a white underbase, so the same design looks identical on white, heather, or black.
Crewnecks print front and back up to about 12 inches wide, plus a 3.5 to 4 inch left-chest logo. Keep prints in the flat chest and back zone, clear of the collar rib, cuffs, waistband, and raglan shoulder seams, and pre-press 3 to 5 seconds to flatten the nap. Cotton-face fleece presses at standard cotton settings, while 50/50 blends press cooler to stop dye migration, and garment-dyed cotton gets a tuned press for the white underbase.
Want a hood? See DTF on hoodies, or the everyday t-shirts guide.
Three products, most jobs covered
Every design and size of the run packed onto one 24 in sheet, paying by the area.
Shop gang sheets → Hot Peel DTF from $7.20Peel in 1 to 2 seconds, no cooling wait. The bulk-pressing workhorse.
Shop hot peel → Same-Day DTF from $9.99Order before 12 PM ET with print-ready art and press tonight.
Shop same-day →Common questions about DTF on sweatshirts
Can I press DTF transfers onto any sweatshirt?
Yes, onto cotton and cotton/poly fleece: 100% cotton face, 80/20, 50/50, and 52/48 blends all take DTF. Avoid waterproof or nylon shells, which do not bond.
What about pressing temperature on fleece?
Cotton fleece presses at standard cotton settings, hotter than the 285°F we use on polyester jerseys, and blends press cooler. Pre-press 3 to 5 seconds first; exact settings come with your order.
Will the print crack on thick fleece after washing?
No. A properly pressed transfer bonds into the fabric and survives 50+ washes. Wash cold inside out, tumble low, skip softener, and never iron over the print.
Which sweatshirt blank is best for DTF?
For value and every size, the Gildan 18000. For a soft retail feel, the Bella+Canvas 3901. For the garment-dyed vintage look, the Comfort Colors 1566. The Jerzees 562M adds the widest budget color range.
Do you press the sweatshirts or just sell transfers?
Both: order press-ready transfers or gang sheets to press yourself, or request a quote and we press onto the crewneck blanks you choose.
Is there a minimum order?
No minimum and no setup fees. A gang sheet fits several designs on one sheet, priced by size, and is the best value past a few sweatshirts.
Ready to press your crewnecks?
Send your artwork and we'll send a quote. No minimums, and same-day printing in Miami on orders placed before 12 PM ET.
Press service
Get a quote
Tell us what you need and the team replies Mon-Fri, 9 AM-6 PM ET.
View full contact info →Prefer to talk? Call (305) 209-6264