Skip to product information
1 of 3
Fluorescent inks · Ready in 24 hours

Neon DTF Transfers

An 8-ink system with fluorescent yellow, magenta, orange, and green. Color that standard 4-ink DTF physically can't produce.

No minimums Same-day before 12 PM ET Free shipping over $75
Regular price $9.99
Regular price Sale price $9.99
from $9.99 · 22 in widepay by area
Build a Gang Sheet
Choose Length (All sheets 22" wide):: 22x12
Choose Length (All sheets 22" wide):

Press service

Get a quote

Tell us what you need and the team replies Mon-Fri, 9 AM-6 PM ET.

View full contact info →

Prefer to talk? Call (305) 209-6264

Request sent! We got it and will reply Mon-Fri, 9 AM-6 PM ET.×
Ready in 24 hoursMon-Fri · 24/7 pickup in Kendall & Doral, or ships nationwide

Reprint guarantee: verified production defects reported within 7 days are made right.

Specifications
File & Print Setup Recommended

File format

PNG · PDF · SVG · AI · PSD

Export settings

300 DPI · RGB color mode

Design background

Transparent required

File review

Every file checked before printing

Pressing & Application How-to

Peel technology

Warm peel: wait 3 to 5 sec, peel slowly

Press instructions

300°F (149°C) · 10 to 12 sec

Second press

10 sec with parchment or Teflon

RIP & color

Epson i3200 · ICC profiles · Neo Stampa RIP

Ink Set & Compatibility Before ordering

Ink set

CMYK + fluorescent yellow, fluorescent magenta, orange, green

Works on

Light and dark fabrics: cotton, poly, blends

Not compatible

Coated, highly elastic, rough textures, sublimated jerseys

Preview

Neon color chart available for $10

Print size cheat sheet
Left chest logo3.5 - 4 in
Adult front10 - 12 in
Youth front~ 8 in
Full back12 - 14 in
Sleeve3 - 3.5 in
Cap front2.5 - 4 in

Size your artwork at final print size, 300 DPI. Full zones in the placement guide.

Pressing instructions (warm peel)
1Pre-press 3 to 5 secondsFlattens the garment and drives out moisture so the bond is even.
2Position the transferPrint side up, centered on your placement zone.
3Press at 300°F (149°C), 10 to 12 secMedium-firm pressure, same as our regular line.
4Wait 3 to 5 seconds, peel slowlyNeon uses a warm peel: not hot, not cold. Count to three, then peel in one motion.
5Second press, 10 secondsCover with parchment or a Teflon sheet and press again. Neon needs the longer seal.
6First wash: wait 24 hoursThen cold, inside out, no softener, tumble low.
Shipping & pickup
Kendall

13268 SW 120th St
Miami, FL 33186
Mon-Fri · 9 AM-6 PM ET

24/7 self-pickup
Doral

3301 NW 82nd Ave
Doral, FL 33122
Mon-Fri · 10 AM-6 PM ET

24/7 self-pickup
Free shipping over $75 nationwide · standard production in 24 business hours · same-day print before 12 PM ET
View full details
The ink set

Color you can't mix, only print

Fluorescent pigment is not a brighter version of regular ink. It is a different ink, and we load four of them.

CyanCMYK
MagentaCMYK
YellowCMYK
BlackCMYK
Fluo Yellowfluorescent
Fluo Magentafluorescent
Orangehigh-vis
Greenhigh-vis
EVENTS
Bachelorette, cruise, festival crews

Neon is the shortcut to a group that finds each other in any crowd, day or night.

MERCH DROPS
Streetwear and nightlife brands

Fluorescent accents photograph loud, and loud sells. One neon hit on a black tee carries the design.

TEAMS & SAFETY
High-visibility by design

Run crews, cheer squads, and staff shirts that need to be spotted across a field or a venue floor.

Want to see the fluorescent range on your own fabric before committing? The Neon color chart is $10.
How it works

From file to pressed in four steps

1
Upload your artwork

Mark which zones should print fluorescent, or send the art and we flag it in review.

2
We check every file

Resolution, transparency, sizing, and fluo mapping get reviewed before printing.

3
Printed with 8 inks

CMYK plus four fluorescent and high-vis inks, ICC-profiled through Neo Stampa RIP.

4
Press with a warm peel

300°F, wait 3 to 5 seconds, peel slowly, then a 10-second seal press.

Steal these ideas

Neon ideas: three places fluorescent earns its keep

Not specs, opinions. What we would print with this product if the order were ours.

Night market signal
Idea 01
Night market signal

A small fluorescent hit on a black tee reads from across the street after dark. At a crowded market, being findable is half the sale.

The evening run club
Idea 02
The evening run club

Neon accents on dark tees: visible on the bridge loop, sharp in the after-run photo. Function and flex in one print.

The 80s party pack
Idea 03
The 80s party pack

Geometric neon shapes on black shirts and the theme does itself. Keep each print small and let the glow carry it.

Pro tips

Make neon actually pop

Fluorescent ink behaves differently from regular color. Six rules that keep it loud:

TIP 01
Respect the warm peel

Neon is neither hot nor cold peel: count 3 to 5 seconds, then peel slowly. Rushing it is the number one neon mistake.

TIP 02
Give it the 10-second seal

The second press runs longer than standard DTF: a full 10 seconds under parchment or Teflon locks the finish.

TIP 03
Pair neon with black

Fluorescent color reads loudest against dark garments with the white underbase doing the lifting.

TIP 04
Use neon as the accent

A full-neon design can fight itself. One fluorescent element on a normal palette hits harder.

TIP 05
Proof with the neon chart

$10 pressed on your own blank shows exactly how loud each fluo reads on your fabric.

TIP 06
Plan for events, print in 24h

Neon orders are ready in 24 hours Mon-Fri, so even a Thursday order makes it to a Saturday event.

Choosing a finish

Which DTF transfer is right for the job?

Hot PeelCold Peel (Cheap)ORGB 9-ColorNeonGlitter
PeelPeel hot, 1 to 2 secPeel after it coolsCold peelWarm peelCold peel
Film width24 in22 in22 in22 in22 in
PricingFrom $7.20$3.50 per linear footFrom $8.00From $9.99From $14.00
Best forSpeed: bulk pressing with no cooling waitBudget runs, sharper edge, softer handBrand-critical reds, oranges, greens, bluesFluorescent color that 4-ink DTF can't hitTextured sparkle with no flaking
Reviews

Rated 5 stars by hundreds of local customers

★★★★★

"I've tried a few other places and I keep coming back here, it's just easy to order and fast!"

Andrea D.
★★★★★

"Great colors, and you can tell they know what they are doing."

Lorena G.
★★★★★

"Fast, and they had same-day service. Love it!"

Brandon B.
FAQ

Neon DTF questions

What makes neon DTF different from bright colors in regular DTF?
The ink itself. Regular DTF mixes everything from CMYK, and fluorescent tones sit outside what CMYK can reach. Our neon line adds four dedicated inks: fluorescent yellow, fluorescent magenta, orange, and green.
How do I press it?
300°F for 10 to 12 seconds, then a warm peel: wait 3 to 5 seconds and peel slowly. Finish with a 10-second second press under parchment or Teflon. Instructions ship with every order.
Does it work on dark fabrics?
Yes: the white underbase keeps fluorescent color vivid on black and navy, which is where neon looks its loudest.
Can I mix neon and regular colors in one design?
Yes. Tell us which elements should print fluorescent, or send the file and we will flag the mapping during the free file review.
How do I know how the colors will look pressed?
Order the Neon color chart for $10, press it on your own blank with your own press, and choose from what you actually see.
How fast can I get neon transfers?
Ready in 24 hours Monday to Friday, with 24/7 pickup in Kendall and Doral or nationwide UPS shipping, free over $75.
How do I care for neon prints?
Same as all DTF: first wash after 24 hours, cold and inside out, no softener, tumble dry low.

Print the shirt they can't miss

Four fluorescent inks, ready in 24 hours, no minimums. Free file check on every order.

Upload your artwork →